Table of Contents
Advertisement
1
hard drive
3
screws (4)
Replacing the Hard Drive(s)
1 Follow the instructions in "Before You Begin" on page 9.
2 Remove the new hard drive from its packaging.
Save the original packaging for storing or shipping the hard drive.
3 Place the hard-drive bracket on the hard drive.
4 Replace the four screws that secure the hard-drive bracket to the hard
drive.
5 Replace hard drive 1 and/or hard drive 2 in the computer base:
•
Place the hard-drive assembly in the computer base.
•
Using the pull-tab, slide the hard-drive assembly into the connector
on the system board.
•
Replace the four screws that secure the hard-drive assembly to the
computer base.
6 Replace the module cover (see "Replacing the Module Cover" on page 16).
30
Hard Drive(s)
2
hard-drive bracket
3
2
1
Advertisement
Table of Contents
