Remote Control - JVC LX-WX50 User Manual

Remote control

1
2
3
4
5
6
7
8
1. POWER
Toggles the projector between standby
mode and on.
2. SOURCE
Displays the source selection bar.
3. MENU
• Accesses the On-Screen Display (OSD)
menu.
• Goes back to previous OSD menu, exits
and saves menu settings.
4. Arrow keys (
Down)
When the On-Screen Display (OSD)
menu is activated, these keys are used as
directional arrows to select the desired
menu items and to make adjustments.
5. ENTER
Activates the selected On-Screen Display
(OSD) menu item.
MODE
Selects an available picture mode.
10 Overview
9
10
11
12
9
13
14
Left, Right, Up,
6. BLANK
Used to blank the screen picture.
of the keys on the projector or remote control to
restore the picture.
7. D. ZOOM-/D. ZOOM-
Displays the Zoom bar.
• D. ZOOM+: After the Zoom bar displays,
magnifies the projected picture size. After
the image is magnified, use
navigate the image.
• D. ZOOM-: After the image is magnified,
reduces the projected picture size. To
quickly restore the picture to its original size,
press AUTO.
8. MUTE
Temporarily mutes the audio.
9. Keystone keys (
Launches the Keystone window. Use
, to manually correct distorted images
resulting from an angled projection.
10. AUTO
Automatically determines the best picture
timings for the displayed image.
11.
Activates panel key lock.
press and hold
menu using the remote control.
12. FREEZE
Freezes the projected image.
13. TIMER
Activates or inactivates an on-screen timer
based on your own timer setting.
14. VOL+
Increases the projector audio volume.
VOL-
Decreases the projector audio volume.
Press most
/ / /
, )
To unlock the keys,
for 3 seconds or setting OSD
to
, ,