Controlling The Projector Using Pjlink - JVC LX-WX50 User Manual

iii. Press Exit to go back to the remote network operation page.
5. After pressing the button 'Contact IT Help', the HELP DESK window will appear at the upper
right corner. You will be able to deliver messages to RoomView™ software which is
connected to the same local area network.
For more information, visit http://www.crestron.com & www.crestron.com/getroomview.

Controlling the projector using PJLink™

This projector supports standard protocol PJLink™ for projector control and you can control and
monitor projector's operations using the same application among projectors of different models
and different manufacturers.
About PJLink™
• To use PJLink™ function, the PJLink™ application software is required.
• For the specifications of PJLink™, access to the Web site of Japan Business Machine and
Information System Industries Association (JBMIA). (http://pjlink.jbmia.or.jp/english)
• This projector is fully compliant to the specifications of JBMIA PJLink™ Class 1. It supports
all the commands defined by PJLink™ Class 1, and the compliance has been verified with
the PJLink™ standard specifications Version 1.4.
Utilizing the PJLink ™ password function
To prevent unauthorized connection to the projector via PJLink™ application, the projector
includes an option for setting up password security.
To access the OSD menu, see
SYSTEM SETUP: Advanced > LAN Settings, and press ENTER.
1. Go to
2. The LAN Settings page is displayed.
3. Press
to select
"admin".
4. Press
to select
5. Enter the current password. Press
A-Z, a-z or symbols. Press ENTER to confirm.
If you forget the password, please use the password "projectorcontroller".
PJLink™ supported commands
Commend
POWR Power control
POWR? Inquiry about the power state
34 Controlling the projector remotely
"Using the OSD menu"
PJLink Certification and press /
Change Password and press ENTER.
/
Description
for details.
to select On. The default password is
to select the digit and press
Remark (Parameter)
0 = Power off
1 = Power on
0 = Standby
1 = Power on
2 = Cooling down
3 = Warming up
to select from 0-9,
/