Panasonic et-jpc100bu Installation Instructions Manual page 22

Installation (continued)
Hook part
22 - ENGLISH
Power cord
ⅱ
ⅰ
Power cord hole
Hook
2) Lift up the projector mount bracket.
 While passing the power cord through the
power cord hole of the projector mount bracket
(i), lift up the projector mount bracket using the
hook parts as the pivot point (ii).
3) Attach the projector mount bracket to the
ceiling mount bracket.
 Slide the projector mount bracket while lifting
it up to hook the hook of the projector mount
bracket on the ceiling mount bracket.
4) Secure the projector mount bracket to the
ceiling mount bracket with the screws, captive
washers.
 Firmly secure the projector mount bracket with
the four supplied screws, captive washers (M4
x 8).