Table of Contents
Advertisement
Before installation
Items to prepare
The items that you need to provide in advance in addition to the supplied parts to mount this product to a ceiling
are as follows.
This product is a bracket for mounting the projector (separately sold product) to a ceiling.
Use it mounted to a compatible projector.
Compatible projectors: PT-JW130FBU / PT-JW130FWU
The following parts are required when mounting the ceiling mount bracket to the ceiling.
Obtain commercially available parts suitable for the structure of the ceiling and installation
method.
The number enclosed in < > is the quantity.
Structure of mounting area
When concrete beams or similar
(Bolt diameter: M10)
When wooden beams or similar
(Bolt diameter: M10)
When ceiling surface with wood reinforcement
members
Note
When moving this product to another place, you will need a fi xer cable tie (total length: 80 mm [3-5/32"], UL
fl ame-retardant grade: UL94-V2) equivalent to the supplied one.
A work bench and a soft cloth to prevent scratches are required when mounting the projector
mount bracket to a projector.
Prepare a bench for the mounting work with a height of at least 280 mm (11") and lay a soft cloth or the like
below the projector to prevent scratches.
Commercially available parts
Ceiling mount bolt <2>
Hexagonal nut <6>
Flat washer <6>
Spring washer <4>
Anchor nut or curled plug <2>
Ceiling mount bolt <2>
Hexagonal nut <8>
Flat washer <8>
Spring washer <4>
Ensure there will be thread engagement of at least 16 mm
(5/8") in the ceiling reinforcement member; wood screw with
nominal diameter of 3.1 mm (1/8") <4>
ENGLISH - 7
Advertisement
Table of Contents
