Volume Offset - Kenwood DNX8170DABS Instruction Manual

Controlling Audio
Initialize
The current EQ curve returns to flat.
ALL SRC
Apply the adjusted equalizer to all sources.
Touch [ALL SRC] and then touch [OK] on the
confirmation screen.
Bass EXT (Bass Extend Settings)
When turned on, the frequency lower than
62.5 Hz is set to the same gain level as 62.5
Hz.
SW Level (
Adjusts the subwoofer volume. This setting
is not available when subwoofer is set to
"None". See Speaker/ X'over setup (P.69).
Ñ
Recall the EQ curve
1
Touch [Preset Select].
2
Select EQ curve.
NOTE
• [iPod] is available only during iPod source.
Ñ
Save the EQ curve
1
Adjust the EQ curve.
2
Touch [Memory].
3
Select where to save.
72

Volume Offset

Finely adjust the volume of the current source
to minimize the difference in volume between
different sources.
1
Press the [MENU] button.
Popup menu appears.
2
Touch [Audio].
Audio screen appears.
3
)
Touch [Volume Offset].
4
Touch [+] or [−] to adjust the level.
Initialize
Returns to the initial settings.
* If you have increased the volume first, then
reduced the volume using the "Volume
Offset", the sound generated if you suddenly
switch to another source may be extremely
loud.