Zone Control; Sound Effect - Kenwood DNX8170DABS Instruction Manual

Zone Control

You can select different sources for both front
and rear positions in the vehicle.
1
Press the [MENU] button.
Popup menu appears.
2
Touch [Audio].
Audio screen appears.
3
Touch [Zone Control].
Zone Control screen appears.
4
Touch [Zone Select].
5
Touch [Dual Zone].
6
Set each source as follows.
[Zone Select]
Touch [Single Zone] to turn off the dual
zone function.
[Front Source] [Rear Source]
Select the audio source for each.
[Rear VOL.]
Adjusts the rear source volume.
NOTE
• When the rear speaker sound is switched, the
audio source that is output at the AV OUTPUT
terminal is also switched to the same source.
• When the dual zone function is set to on, the
following functions are not available.
– Output from the subwoofer
– Subwoofer Level/ Bass Boost (P.73)
– Equalizer Control/ Sound Effect/ Listening
Position (P.71, 73, 74)
– Speaker Setup (P.69)
– High-resolution Sound Source File Playback
• You cannot select iPod if it is connected via
Bluetooth.
• If you select USB, SD, iPod, Disc, Mirroring,
Bluetooth audio, Apple CarPlay or Android Auto
as the Front Source, you cannot select USB, SD or
iPod as the Rear Source.

Sound Effect

You can set sound effects.
1
Press the [MENU] button.
Popup menu appears.
2
Touch [Audio].
Audio screen appears.
3
Touch [Sound Effect].
4
Set each item as follows.
Bass Boost
Sets the amount of bass boost among "OFF"/
"1"/ "2"/ "3".
Loudness
Sets the amounts of boost of low and high
tones.
"OFF", "Low", "High"
Controlling Audio
73
English