Panasonic VL-SWD273 Installation Manual page 15

2-2 How to make wiring connections
While pressing on the button (F) with a
pointed object such as a screwdriver, insert
the wire into the terminal connector (G). (To
disconnect a wire, pull out the wire while
pressing on the button (F).)
F
G
I
H Bare wire at tip: 9mm
I Wiring from doorphone
Important:
Do not connect the power cable.
(Damage may occur.)
3
Mount the main monitor/extension monitor to
the mounting bracket.
3-1 Line up the tab on the bottom of the
bracket with the groove on the main monitor/
extension monitor.
3-2 Line up the tab on the top of the bracket
with the groove on the main monitor/extension
H
monitor, and push the main monitor/extension
monitor down until it is secure.
Notes about electrical wiring
Make sure not to pinch
the wires (as shown to
the right) on the mounting
bracket when installing.
R Do not forcibly attach
to the mounting
bracket.
15