Preventing Injury - Panasonic VL-SWD273 Installation Manual

may cause such devices to
malfunction, resulting in an accident.
CAUTION
Preventing electric shock
RIf the wiring is underground, do not
make any connections underground.
RIf the wiring is underground, use a
protection tube.
Supplied accessories for installation
*1
For the doorphone
Mounting base × 1
For the main monitor/extension monitor
Mounting bracket × 1
Power supply unit and related items
Power supply unit × 1
(VL-PS240)
Important:
R You will need the following additional items to install and configure the doorphone and the
main monitor/extension monitor.
Screw × 4
(4 mm × 12 mm) (3.8 mm × 20 mm)
Screw × 2
(4 mm × 16 mm)
*2
Power supply unit and related items
Cable binder × 2
Screw × 2 Power supply unit × 1
(4 mm × 40 mm)
RIf the wiring is outdoors, use a
protection tube or a surge protector.

Preventing injury

Install the product securely adhering
R
to the instructions in this guide to
prevent it from falling off the wall.
Avoid installing onto low-strength
walls, such as gypsum board, ALC
(autoclaved lightweight concrete),
concrete block, or veneer (less than
18 mm thick) walls.
Screw × 2 Name plate × 2
(incl. 1 spare)
(VL-PS241)
Hex wrench × 1
*3
Cable binder ×
AC cable × 1 Screw × 2
(4 mm ×
40 mm)
1
3