JVC UX-A52 Service Manual page 16

UX-A52
<CD Mechanism Assembly>
Removing the CL. Base Assembly and Tray
(Refer to Figs. 1 to 5.)
1. Remove the two screws A fastening the CL. base
assembly from the top of the CD mechanism
assembly.
2. Move the CL. base assembly diagonally upwards
as indicated by the arrow to release it from the two
hooks a.
3. Turn the idle gear in the arrow-marked direction
from the upper side of the CD mechanism
assembly. Accordingly, the TRAMECHA assembly
moves downwards.
Note: When drawing out the tray, shift down the
TRAMECHA assembly to the position where
the tray does not contact the T-T assembly
of the TRAMECHA assembly.
4. Draw out the tray frontwards for removing it.
Note: When reinstalling the tray:
Turn the idle gear so that the part b of the
tray gear is positioned in the part c shown in
Fig. 4. (Eject position)
Engage the right and left hooks d and e of
the tray with the right and left grooves of the
TRAMECHA assembly respectively for
retaining the tray.
Hook d
Fig. 5
1-16
CL. base assembly
A
TRAMECHA
assembly
Tray
Idle gear
Tray gear
Hook d
Tray
Hook a
A
Fig. 1
Fig. 2
TRAMECHA assembly
Tray
Fig. 3
Part c
Part b
Tray gear
Fig. 4
Hook a
Idle gear
Idle gear