Table of Contents
Advertisement
GETTING STARTED
Preparing the phone for operation
Please refer to the Getting started with your M430i booklet.
Basic operations
Turning the phone On
1
Open the clamshell.
2
Press and hold the [On/Off] key. A beep sounds at mobile activation. When switching the
mobile On for the first time or if the phone has been incorrectly switched off
played.
3
If your SIM card is PIN protected,
Enter the PIN code and select OK.
4
If prompted, enter the date & time or select
Please refer to "Security Code: PIN codes", page 7 and to "Security features", page 94 for more details on
your PIN and lock codes.
If an image is set as a Welcome screen and/or a melody has been set as a Welcome melody, the
mobile first requests the PIN code then shows the selected image/animation and plays the selected
melody before showing the standby display (please see "Setting a still or animated image as a
standby display (for the Main screen or the External screen), as a Welcome screen or as a Goodbye
screen from the Pictures folder", page 59 and "Melodies", page 60).
If you set an application as a standby display for your mobile internal screen (see "Games & applications",
page 63), an information screen is displayed and proposes to display the Doja application.
Making a call
The phone can make and receive calls only when it is switched on, when a valid SIM card is
inserted and when it is connected to a GSM, DCS or PCS network service.
If the keypad is locked you can receive calls but you cannot make any (see "Keypad lock", page 13)
except emergency calls.
To make a call:
1
Open the clamshell.
2
Dial the phone number or select one from your Phone book (press the [Left] arrow key or the
[Phone book] key from the standby display and select one of the available names).
3
Press the [Call/Send] key.
Whilst in conversation an Options list (Speaker On or Speaker Off, AutoDTMF, Hold, Re-
trieve, Mute or Unmute, End call and Record) and Sp.on (Speaker On)/Sp.off (Speaker Off,
after the speaker has been set to On) is available from the Left and Right softkeys.
You can set the conversation volume by scrolling Up and Down
In compliance with European regulations, you are obliged to inform your correspondent before
recording a phone conversation.
Answering a call
When receiving a phone call:
1
Press the [Call/Send] key.
You can also answer a call by opening the clamshell. Please see "Active flip", page 88.
When a phone call is received the caller name, number (see "Receiving caller ID", page 92),
picture/video (see "Storing names and telephone numbers", page 33) may be displayed if you
created a Phone book card corresponding to this caller.
Enter PIN
is displayed.
Exit
if the information is correct.
Getting started
11-
may be dis-
Advertisement
Table of Contents
