Table of Contents
Advertisement
Battery disposal
In compliance with European environmental protection directives, used batteries must be
returned to the place of sale, where they are collected free of charge.
Do not dispose of your batteries within household waste.
PC cable
The PC cable allows you to connect the GSM mobile telephone to a Personal Computer in order to
exchange data. The PC cable may not be supplied with your mobile. Please check this accessory
availability with your retailer.
Your responsibility
This GSM mobile telephone is your responsibility. Please handle it with care and in respect of local
regulations. Please keep it in a safe place at all times and out of reach of children.
Familiarise yourself with and use the security features to block unauthorised use. If your phone and/
or SIM card are lost or stolen, call your service provider immediately to prevent illegal use.
When not in use, turn off the phone and remove the battery.
Security Code: PIN codes
The phone and SIM card are delivered to you pre-programmed with codes that protect the phone
and SIM card against unauthorised use. A short description of each follows. See "Security features",
page 94 to change your PIN and phone lock codes.
PIN and PIN2 codes (4-8 digits)
All SIM cards have a PIN (Personal Identity Number) that protects the card against unauthorised
use.
Entering the wrong PIN code three times disables the SIM card and the message
Enter PUK
.
then displayed
appears.
PUK and PUK2 codes (8 digits)
Please ask your service provider for your PUK code. Use it to unblock a disabled SIM card (see "Se-
curity features", page 94).
The PUK2 code is required to unblock the PIN2 code (see above).
Call barring password (4 digits)
This password is used to bar various types of calls, made or received, from the phone (see "Call
barring password", page 94).
Phone lock code (4 digits)
This code is set to 0000 on delivery. You can change it. Once changed it cannot be identified by the
manufacturer over the phone. Please refer to "Phone lock code", page 94 for more details.
i-mode lock (4 digits)
The default i-mode lock code is 0000.
It allows you to forbid any unauthorised use of the i-mode feature (see "i-mode lock", page 74).
We advise you remember these codes and make yourself familiar with their purpose and operation.
Disposing of waste packaging
The packaging used for this phone is made of recyclable materials and as such should be disposed
of in accordance with your country's national legislation on the protection of the environment.
Please take care to separate the cardboard and plastic elements and to dispose of them in the cor-
rect manner.
Introduction
7-
SIM Blocked
is
Advertisement
Table of Contents
