D-Link AirPlus DP-G310 Quick Installation Manual page 2

Connecting The DP-G310 To Your Network
First, insert one end of a straight-through CAT5 Ethernet cable into the DP-
G310's Network Port (shown below.) Connect the other end of the cable to the
LAN port of the gateway or
the DP-G310 until you are advised to do so.
Receptor for
AC Power
Adapter
Warning!
Only a USB printer may be connected to the USB port of the DP-G310. Do
not connect any other USB device to the DP-G310's USB port; doing so
may damage the unit, voiding the warranty for this product.
Next, make sure that your Printer is turned OFF.
Using your USB cable, connect one end of the cable to the USB port of the
DP-G310 and the other end to the USB port of your printer. Turn ON the
.
printer
Then, plug one end of the power adapter into the DP-G310 and the other end
into your electric outlet. The DP-G310 will turn on and begin a self-test.
For Mac OS printing, please refer to manual (.pdf) located on the CD-ROM.
switch. Note: Do not connect the power cord to
USB Port
2
Network Port