Safety Equipment; Dismantling The Chain Brake - Husqvarna 120 Workshop Manual

6.1 Dismantling the chain brake

WARNING!
Exercise care to ensure the spring
does not fly out and cause personal
injury. Wear protective goggles.
1
Loosen the bar nuts and remove the clutch cover,
guide bar and saw chain. See figure 1.
2
Use a heat gun to loosen the thread lock on the
mounting screw. Unscrew the mounting screw
for the handle, using an Allen key and a socket
wrench. Remove the screw and release the handle.
3
Release the tension in the brake spring by press-
ing down the lever. See figure 2b.

6 Safety equipment

Fig 1
Fig 2
Fig 2b
Safety equipment
19
English -