Husqvarna 120 Workshop Manual page 38

Repair Instructions
Dismantling the carburettor
1
Remove the cylinder cover and the air filter.
Loosen the threes screws outlined in figure 33.
2
Remove the air filter system.
3
Remove the choke and throttle wire. See figure 34.
4
Detach the fuel hose.
5
Lift the carburettor up and detach the hose under
the carburettor.
6
Remove the carburettor.
7
Dismantle the pump cover (A). Remove the control
diaphragm (B) and gasket (C). See figure 35.
38
- English
Fig 33
Fig 34
Fig 35
A
B
C