HOW TO USE
5 Adjustment of feed (stitch)
length and backstitch
● A djustment of feed (stitch) length...Adjust feed
length by turning the feed length setting dial
while pushing PUSH lever.
● B ackstitch...Direction of stitching can be
reversed by depressing the reverse sewing
lever or pushing the touch back switch.
● T ouch back switch...In the case that the switch
is turned to the arrow direction by 180° , no
backward stitching occurs even when the
switch is pushed.
Use this function to avoid the malfunction such
as unnecessary reverse stitching in the case
that the fabric comes in contact with the switch
during sewing.
6 Setting of bobbins
( 1 ) Pull out 5cm thread tail from bobbins.
( 2 ) Put bobbins into hooks in the direction as the
following figure.
Feed length setting dial
Bed slide
Hook
— 6 —
Reverse sewing lever
Touch back
switch
Thread
Bed slide
Hook