Using The Dishwasher; Quick Operation Guide - Panasonic NP-6F2MUQNZ Operating And Installation Instructions

Using the Dishwasher

For detailed operating method, read the corresponding content at Page 11-22.
Operation
1. Switch ON the main
switch.
2. Fill the Detergent
Dispenser.
3. Check the rinse aid
level.
4. Load the baskets.
5. Select a programme.
6. Running the
Dishwasher.
7. Switch OFF the
Dishwasher.
8. Turn OFF the water
tap, unload the basket.
Wait for approximately 15 minutes before unloading the dishes to avoid
handling them while they are hot and susceptible to breakage.

Quick Operation Guide

1. Switch ON the main switch on the wall.
2. Fully open the Dishwasher door.
Compartment A: With each wash cycle.
Compartment B: For programmes with pre-wash only.
(Refer to Page 13)
Rinse Aid indicator.
Electric indicator on Control Panel. Follow to "When Refi lling
the Rinse Aid Dispenser". (Refer to Page 14)
1. Scrape off any large amount of leftover food.
2. Soften remnants of burnt food in pans, then load the
basket.
3. Follow to the loading instructions. (Refer to Page 16)
1. Fully close the Dishwasher door.
2. Turn the Dishwasher to standby mode by pressing the
OFF/ON button.
3. Select desired programme by pressing the Programme
Selection button until the selected programme lights up.
Turn ON the water tap and press the Pause/Start button.
The Dishwasher will start running.
1. When the working cycle has fi nished, the buzzer will
sound 8 times before stop. "END" will be displayed after
the washing cycle has completed.
2. Turn OFF the Dishwasher by pressing the OFF/ON
button.
1. Turn OFF the water tap.
2. Start from the Lower Basket when unloading the dishes.
3. Switch OFF the main switch on the wall.
WARNING
Function description
9