Figure 4-49. 13.3-Inch Lcd Bracket Removal; Inch Lcd Bracket - Dell Inspiron 3200 Service Manual

13.3-Inch LCD Bracket

LCD cable harness
BR1
BR2
(screws BR1–BR3
are 5 mm)
5 mm

Figure 4-49. 13.3-Inch LCD Bracket Removal

To remove the 13.3-inch LCD bracket, follow these steps:
1. Remove the front bezel.
See "13.3-Inch LCD Front Bezel" found earlier in this section.
2. Remove the LCD panel.
See "13.3-Inch LCD Panel" found earlier in this section.
3. Remove the hinges.
See the previous subsection, "13.3-inch LCD Hinges."
4. Remove the bracket from the back cover.
Remove EPE foam (taped in place). Remove bracket screws BR1, BR2, and
BR3. Remove the bracket using two plastic wedges.
Be careful not to break the plastic case of the back cover or mar the EMI fin-
ish on the inside of the cover.
BR3
EPE foam
bracket
back cover
Removing and Replacing Parts 4-69