Setting Up the APR for Windows 2000
NOTICE:
Do not install the drivers from the CD that is shipped with the APR.
The network adapter will not work if they are installed.
If the computer is on, shut down the operating system and turn off the
1
computer (see page 18).
Disconnect all external devices from the APR.
2
Insert the computer into the APR.
3
Attach the network cable and the AC adapter to the APR.
4
Turn on the computer.
5
Log on as a user with administrative privileges.
6
Make sure that 3Com PCI Ethernet Adapter (10/100) appears in the
7
Found New Hardware window.
Windows 2000 automatically installs the network adapter drivers.
23
Sett ing Up