Dell PowerVault 720N Installation And Troubleshooting Manual page 45

Figure 2-10 shows a SCSI cable connected to the tape backup device and to the con-
nector, labeled SCSI TAPE.
SCSI tape
connector
You can connect the filer to multiple networks.
This section describes how to connect your filer to an Ethernet network.
During your initial purchase, you order the NICs you need. The filer is shipped with the
NICs installed. You can also order additional NICs later.
The NICs' connectors fit through the slot openings in the filer's back panel.
Connector,
labeled FC-AL0
Connector,
labeled PRI
SCSI terminator
SCSI tape
backup device
Installing a Filer System 2-15