Toro TX 427 Operation And Safety Manual page 5

1. Warning—read the Operator's Manual.
2. Warning—lower the loader arms, engage the parking brake, shut off the engine, and remove the key before leaving the machine.
3. Crushing hazard from above—install the cylinder lock and read the Operator's Manual before performing maintenance.
4. Cutting hazard of hands or feet—wait for all moving parts to stop; stay away from moving parts; keep all guards and shields in
place.
5. Crushing/dismemberment hazard of bystanders—keep bystanders away.
6. Explosion hazard; electrical shock hazard—do not operate if power lines may be present; call your local utility company.
1. Read the Operator's Manual stored in your machine.
2. Fast
3. Throttle
4. Slow
5. Choke—on
6. Choke—off
7. Fuel
8. Hydraulic fluid temperature
115-4860
138-0799
9. Hour meter
10. Engine—start
11. Engine—run
12. Engine—shut off
13. Warning—do not operate this machine unless you are trained.
14. Electrical shock hazard, overhead power lines—watch for
overhead power lines.
15. Tipping hazard—move the traction unit with the heavy end
uphill; carry loads low; do not drive the machine with the load
raised.
16. Tipping hazard—drive slowly when turning; do not turn
sharply while traveling fast; look behind and down when
moving in reverse.
5
decal115-4860
decal138-0799