Table of Contents
Advertisement
MKE
Selecting the length
Technical data of the power and feedback cables
Name
Ready-made cable type designa-
tion
Type designation of cable (cable
parts)
Diameter of power or supply
strands
Control strand diameter (holding
brake, temperature monitor or
control voltage)
Diameter
Minimum bend radius
fixed routing
flexible routing
(≥ 1 000 000 bend loads)
Protection category (transition
cable/terminal box) with expert
mounting
Chemical features
Permissible ambient temperature
for operation and storage
Cable surface
Specific cable weight
3-6
Electrical connections
⇒ Locate the cable which suits your motor/controller combination in the
table below.
Motor type
all motor types with
terminal box
Fig. 3-6: Ready-made feedback cable to connect to MKE motors with terminal
box
Available cable length: 5, 10, 15, 20, 30m. Other lengths available upon
request.
⇒ When ordering, just enter the cable type and desired length. Example:
IKS 0203 / 5 (= feedback cable, length 5 meters).
Note:
Maximum total length of the cable connection from motor to
drive controller with two intermediate plugin locations equals
75 m. With more plugin locations, the maximum total length
drops. This may also necessitate testing.
Unit
Power cables
IKG0307
INK0653
mm²
4 x 1.0
mm²
2 x (2 x 0.75)
mm
12.5 ±0.3
mm
75
mm
120
absolute resistance to mineral oils and greases, hydrolysis resistant,
ºC
Poor adhesion, prevents sticking in drag chains
kg/m
0.25
Fig. 3-7: Technical data of power and feedback cables for MKE motors with
terminal box
Direct connection
of motor to drive
controller
point motor to drive
IKS0203
Data
IKG0308
INK0650
4 x 1.5
2 x (2 x 0.75)
12.2 ±0.4
80
120
IP 65
silicone and halogen free
-30 to +80
0.39
DOK-MOTOR*-MKE*******-PRJ1-EN-E1,44 • 06.97
Connected via
pluggable isolating
controller
in prep.
Feedback cables
IKS0203
INK0448
2 x 0.5
4 x (2 x 0.25)
8.5 ±0.3
50
90
0.10
Advertisement
Table of Contents
