Table of Contents
Advertisement
10.4 Notes on handling and mounting
10.5 Notes on protection against dangerous movements
DOK-MOTOR*-MKE*******-PRJ1-EN-E1,44 • 06.97
High electrical voltages from improper connections!
DANGER to life or severe injury!
⇒ Only those devices, electrical components or lines
may be connected to the signal voltages of these
WARNING
components if they are sufficiently and safely isolated
from the connected electrical circuits as complying
with set standards (as per DIN EN 50178/edition
11.94, section 5.3.2.3).
DANGER when handling!
Injury from pinching, shearing, cutting and poking!
⇒ Comply with the general setup and safety guidelines
on handlnig and mounting.
CAUTION
⇒ Use suitable mounting and transport devices and
special took, if necessary.
⇒ Squeezing and pinching can be prevented with the
proper measures.
⇒ If necessary, wear suitable protective clothing (for ex-
ample, protective eyewear, shoes and gloves).
⇒ Do not stand under hanging loads.
⇒ Spilled liquids must be wiped up immediately to avoid
slipping.
The causes of dangerous motions can be various:
• faulty control
• software error
• component failure
• faulty wiring and cabling
• error in encoder for signals and measured values
• error causes by improper use of components
These errors can occur either directly after powering up or any time the-
reafter.
Safety Guidelines for electrical drives
MKE
10-3
Advertisement
Table of Contents
