Setting Up An Hp 81200 System Based On Hp E4849A/B Mainframe - HP 81200 Installation Manual

Setting up a proprietary System

Setting up an HP 81200 System based on HP E4849A/B Mainframe

Setting up an HP 81200 System based on HP E4849A/B Mainframe
The HP 81200 System consists of the bundled HP E4849A/B mainframe. The HP E4849A/B consists
of a 13-slot frame HP E1401B. an embedded Pentium Processor with min 64 MB RAM and 3.5" disk
drive and with Windows NT 4.0, HP E4873A user software, HP SICL installed. An installation guide
is also part of the shipment (you are actually reading it).
In addition there is in minimum one module installed, the HP E4831A, the Clock and Data Generator
module.
It is possible to add up to nine HP E4841A modules to this systems.
To have a maximum of nine HP E4841A modules working in this mainframe it is necessary to have
the HP E4805A Central Clock module instead of the HP E4831A Clock and Data Generator Module.
Figure 9 A typical HP 81200 System based on HP E4849A/B Mainframe
WA RN IN G The HP HP 81200 System is not designed for outdoor use. Do not expose the HP 81200
System to rain or other excessive moisture. Protect the HP 81200 System from humidity and
temperature changes which could cause condensation within the instrument.
22