Connecting
5.2 Gas connections
5.2.2.4
CALOMAT 7
Safety instruction(s)
Note
Pipes
Connect the pipes with the gas connections using suitable clamp ring screwed glands.
The material of the parts in contact with the gas (clamp ring screwed glands) must be
appropriate to the application.
Note
Identifier of the gas connections
The identifier of the gas connections is imprinted as numbers 1 to 4 on the module plate.
Arrangement of the gas connections in the rack unit
①
1
2
3
4
Figure 5-21
The sample gas connections are made of stainless steel with material no. 1.4571 and are
designed as connecting fittings with a pipe diameter of 6 mm.
Connect the gas lines to the corresponding inlets/outlets.
66
CALOMAT 7
Sample gas inlet
Sample gas outlet
n.c.
n.c.
CALOMAT 7 gas connections in the rack unit, rear
Compact Operating Instructions, 06/2017, A5E31805656-05
Quick Start