Advertisement
How to use (P.13〜15)
For initial use, trim while lightly applying the shaver to skin.
How to shave with the outer blade (P.13)
Check that there is no breakage and deformation of the outer blade
before use. (Cause of damage to skin)
Never press it strongly to the skin. (Cause of damage to skin
especially lips and cause of damage to the outer blade)
Never shave with only a part of the outer blade or bring fingers or
nails into contact with the outer blade during use.
(Cause of damage to the outer blade resulting in damage to skin)
Use carefully if you have acne or abrasions on skin.
(Breakage causes damage to skin)
1. Remove the cap, and turn the switch "ON" while
pushing the lock button.
2. Shave against the flow of your beard
in the direction of the arrow so as to lightly slide.
How to shave closely
(1) Stretch your skin by hand to raise your beard.
(2) Apply the blade surface to your skin at right angles.
(3) Lightly apply, and slowly shave against the flow of your
beard so as to slide.
To shave a long grown beard that is hard to shave with the
outer blade:
Cut a long grown beard short with the trimming blade, and
finish with the outer blade.
The recommended operating temperature is in the range of
5 – 35°C. Use or storage at a temperature below the
recommended temperature may disable the shaver or cause
a reduced number of operating times.
3. After use, turn the switch to "OFF" and attach the cap to the
shaver.
How to shave with the trimming blade (P.15)
If a lot of hair enters the blade edge, the hair will be pulled, or get
stuck, causing deterioration in sharpness.
1. Turn the switch to "
Use with the cap attached.
(Danger of entry of hair into the outer blade)
2. Lightly apply the trimming blade to your skin at right angles, and
slowly shave in the direction of the arrow.
Never press the blade edge to the skin strongly or slide sideways.
(Cause of damage to skin)
3. After use, turn the switch to "OFF," and store the trimming blade.
While pushing
the lock button
" and pop up the trimming blade.
36
O N
O FF
CH AR G E
•
Advertisement
