Maintenance And Care - Black & Decker Price Pfister Harbor 36-CL Series Manual

MAINTENANCE & CARE
14
14A
14C
14D
14E
14 FLUSHING
After installation is complete, remove Aerator Housing (14A). Turn Valves (14B)
on and allow both hot and cold water to run for at least one minute each. While
water is running, check for leaks. To clean the aerator, disassemble Aerator
Housing (14A) by separating the Aerator Head (14C), Basket (14D) and Washer
(14E). Once parts have been cleaned, reassemble by reversing steps.
15
15 HANDLE REMOVAL
Turn off water before proceeding! With valves in closed position, detach
Decorative Button (15A), unscrew Fastener (15B) and remove Handle and
Hub (15C) from Valve Stem (15D).
ENGLISH
14B
15A
15B
15C
15D
16
14 VALVE CARTRIDGE MAINTENANCE
Turn off water supplies and relieve pressure before working on your
faucet. Remove handles (See Step 15), unscrew Cartridge Assembly (16A)
and inspect. Replace parts as necessary. Reassemble parts by reversing
steps.
CAUTION: Maintenance
DISASSEMBLY
1. Replacement parts may be available at the store where you
purchased your faucet.
2. When replacement parts are not available, please write or
call Price Pfi ster Consumer Service.
3. Always turn off water and relieve pressure before
working on your faucet.
NOTE: Trim Care
Cleaning Instructions:
For all handles and decorative fi nishes, use only a soft damp
cloth to clean and shine. Use of polish, detergents, abrasive
cleaners, organic solvents, or acid may cause damage. Use of
other than a soft damp cloth will nullify our warranty!
Special Trim:
Trim products which contain porcelain or other similar
substances are not acceptable for public areas or commercial
use. Installation of said trim is at user's risk!
1-800-PFAUCET (1-800-732-8238)
For Toll-Free Pfaucet information call
1-800-PFAUCET (1-800-732-8238)
or visit www.pricepfi ster.com
• Installation Support
• Care and Warranty Information
5
16A