Table of Contents
Advertisement
4 System Commissioning
This chapter mainly introduces debugging operations.
Checking system function
Checking System Function
After the installation and configuration, it is necessary to test and confirm system functions before
delivery. The following items need to be checked:
1． While in standby mode, check that each device works normally. If the fault detection function is
enabled, users can simulate a fault to check whether it can be detected by the device.
2． If the amplifier backup function is available, check whether the spare power amplifier can replace
the main power amplifier and continue to operate as expected.
3． Check that all broadcast functions work according to user requirements.
92
Advertisement
Table of Contents
