Loading Procedure - GE TONOPORT V Service Manual

7.2

Loading Procedure

Step
TONOPORT
V
1 Switch on
TONOPORT
V
1
2
1 Press
3
"START"
4
5 Press "INFO"
6
1. Steps 2 and 3 are not applicable if V 1.3 or 1.4 is installed on TONOPORT V.
2. Note down the "LANGUAGE" (DEUTSCH, ENGLISH, FRANCAIS, ITALIANO, ESPAÑOL) which is installed on TONOPORT
V (Step1)
7-4
Firmware Loading Procedure for FW1.4: Loading Procedure
Connect inactive TONOPORT to PC COM port via serial cable.
Start Hyperterminal or Telix on the PC.
NOTE
After TONOPORT V has been switched on, updating can only be carried
out within the first 10 minutes. After 10 minutes TONOPORT V enters a
power down mode and can be reactivated by switching on and off.
Follow steps 1...6.
Duration
Action
(approx.)
PC Telix
Hyperterminal
8 seconds
8 seconds
Transfer 2 seconds
ERASE.INT 2 seconds
3 seconds
3 seconds
Transfer 50 seconds
BOOT14.PRG 25 seconds
11 seconds
11 seconds
Transfer 10 minutes max.
HAUPT14.PR
G
TONOPORT V
PC monitor
TONOPORT V - V1.0*,
TONOPORT V - V1.1 or
TONOPORT V- V 1.2 or
TONOPORT V - V 1.3 /
"LANGUAGE"
TONOPORT V - V 1.4 /
"LANGUAGE"
2
WAIT-BOOT.
BOOT-WRITE = OK
ERASE HAUPT UND DRUCK-PRG
ERASE-OK
WAIT-HAUPT.PRG VERSION 1.4
TONOPORT V-FW1.4/DEUTSCH
2001589-023
Display
TONOPORT V LCD
HH:MM (time)
LLLL (flashing)
0000
LLLL (flashing)
all segments ON
HHLMM (time
Revision H