Sw Loading Procedure; Introduction; Customer Provided Prerequisite - GE Vivid 7 Service Manual

GE M S
EDICAL YSTEMS
D FC091194, R
IRECTION
Section 8-3

SW Loading Procedure

In order to complete a successful restore of the database, the images must be moved to MO disks
NOTICE
before doing backup of Patient Database. If the backup procedure is not completed correctly, the
images and database information could be lost.
Do not use this procedure when upgrading a unit from BT'01 to BT'02 sw. level. Additional sw, not
NOTICE
described here, is needed for such upgrades.
8-3-1

Introduction

This procedure describes how to perform a complete installation of the software on the Vivid 7 / Vivid 7
PRO's hard disk. This procedure is included in case it should be necessary to reinstall the present
software.
Before installation, moving patient images, backup of customer presets and Patient Database to MO
disks, must be completed.
TCP/IP addresses, computer name and software option password settings must be manually recorded.
The backup procedure will move all images from the internal hard disk to a removable MO disk. It will
also save the Patient Archive, Report Archive, System Configuration and User Defined Configuration to
a backup MO disk.
Table 8-2
Section
8-3-1
8-3-2
8-3-3
8-3-4
8-3-5
8-3-6
8-3-7
8-3-8
8-3-9
8-3-10
8-3-2

Customer Provided Prerequisite

• Formatted and labelled MO Disks for Images storage
• Formatted and labelled MO Disk for Patient Archive and User defined settings.
02
EVISION
Sub-sections in this Procedure
Tools Provided With Unit or After a Software Upgrade
Backup of Patient Database and User Presets
Recording of SW Option Keys, TCP/IP and Service Settings
Chapter 8 - Replacement Procedures
Description
Introduction
Customer Provided Prerequisite
Preparation
Prepare MO Disks for Image Storage
Move Images
Prepare MO Disk for Patient Archive
Software Installation
V 7 / V 7 PRO S
IVID IVID ERVICE
M
ANUAL
Page
Number
8-9
8-9
8-9
8-11
8-12
8-13
8-15
8-16
8-18
8-24
8 - 9