HP StorageWorks 700ux Setup Manual page 22

Installation
Note:
the rack mount kit.
4. Connect the jukebox to your host computer and terminate the last device in
Figure 8: Connecting to the host
22
For rack mount configurations, refer to the installation procedure provided with
the SCSI chain (see Figure
WARNING: This product can only be used with an HP approved power cord
for your specific geographic region. Use of a non-HP approved power cord
may result in: 1) noncompliance with individual, country-specific safety
requirements; 2) insufficient conductor ampacity that could result in
overheating with potential personal injury and/or property damage; and 3) a
fractured power cord, which could cause the internal contacts to be exposed,
which potentially could subject the user to a shock hazard. HP disclaims all
liability when HP approved power cords are not used.
8).
HP StorageWorks 700ux/1100ux Optical Jukebox Setup Guide