Panasonic U-8ME1E8E Service Manual page 50

DN
30 System oil recovery in regular intervals
31 Factory use
32 Invalid
34 Invalid
Condensation temperature adjustment
35
Lower temperature of B area (Tc_L)
Condensation temperature adjustment
36
Upper temperature of B area (Tc_U)
38 Factory use
Aid capacity of compressor adjustment
39
(Additional compressor capacity at part load)
3A Factory use
3B Factory use
3C Minimum horse power of compressor in cooling
3D Minimum horse power of compressor in heating
3E Delay start of outdoor unit
Evaporation temperature adjustment
3F
Lower temperature of B area (Te_L)
Evaporation temperature adjustment
40
Upper temperature of B area (Te_U)
Regular intervals of system oil recovery control
41
(Long operation time in the part load)
43 Oil recovery control processing time
46 Factory use
47 Factory use
48 Automatic backup operation
49 Factory use
4A Forced defrosting (SILENT pin action)
4B Limit pressure adjustment
4C Factory use
4D Interval of system oil recovery control
Upper current limitation mode
4E
invalid at defrosting
4F Factory use
60 –75: Memory area for production
DN
60
| For production
75
Item
Item
1 - 43
Control Functions-Outdoor Unit
Setting No
0(P)=Valid, 1=Cancel (For detail refer to 7-5-1),
2=No use
-
-
-
-7, -6,,, ,,, 0(P),,, ,,, 6, 7
(For detail refer to 3-6-2)
-7, -6,,, ,,, 0(P),,, ,,, 6, 7
(For detail refer to 3-6-2)
-
-2, -1, 0(P), 1, 2 (House power)
-
-
0(P)=0.1, 1=0.1, 2=0.2,,, ,,,99=9.9
0(P)=0.1, 1=0.1, 2=0.2,,, ,,,99=9.9
0(P), 1, 2, 3 (For detail refer to 2-2-2)
-9, -8,,, ,,, 0(P),,, ,,, 8, 9
(For detail refer to 3-6-1)
-9, -8,,, ,,, 0(P),,, ,,, 8, 9
(For detail refer to 3-6-1)
30, 40,,, ,,, 150(P),,, ,,,290, 300
(For detail refer to 7-5)
0, 30, 60(P), 90,,, ,,, 570, 600 (For detail refer to 7-5-2)
-
-
0(P)=Valid, 1=invalid
-
0(P)=Silent mode, 1=Forced defrosting
0, 1, 2(P), 3 (For detail refer to 3-6-2)
-
0=0, 1=15, 2=30(P), 3=45, 4=60 (For detail refer to
7-5)
0(P), 1
-
Setting No
2WAY SYSTEM
1