Siemens SIMATIC IFP2200 INOX MT ETH Compact Operating Instructions page 34

Technical specifications
5.2 Certificates and approvals
EU Declarations of Conformity
The EU Declarations of Conformity are available to the relevant authorities at the following
address:
Siemens AG
Digital Industries
Factory Automation
DI FA HMI
Breslauer Str. 5
DE-90766 Fürth, Germany
You can download information on the EC Declaration of Conformity, here under the keyword
"Declaration of Conformity":
IFP certificates (https://support.industry.siemens.com/cs/ww/en/ps/16788/cert)
Special approvals
DGUV approval
This device has been tested according to test basis GS-NV 6:2017/09 Testing principles for
hygiene:
• The number of the corresponding test report can be found on the DGUV label on the
device.
• Valid certificates issued by the testing and certification bodies in DGUV Test can be found
in the DGUV Test Certificate database.
UL approval
Observe the following information:
• The device shall be supplied from an isolating source, rated 24 VDC.
• Only for use in LAN, not for connection to telecommunication circuits.
Underwriters Laboratories Inc., to
• UL 508 (Industrial Control Equipment)
• CSA C22.2 No. 142 (Process Control Equipment)
or
Underwriters Laboratories Inc., to
• UL 508 (Industrial Control Equipment)
• CSA C22.2 No. 142 (Process Control Equipment)
• ANSI/ISA 12.12.01
• CSA C22.2 No. 213 (Hazardous Location)
Approved for use in
• Class I, Division 2, Group A, B, C, D T4 or
• Class I, Zone 2, Group IIC T4 or
• non-hazardous locations
IEC 61131
The devices meet the requirements and criteria of IEC 61131-2, Programmable Logic
Controllers, Part 2: Equipment requirements and tests.
34
Compact Operating Instructions, 07/2021, A5E42185570-AD
IFP2200 INOX MT ETH