System Settings - Sony VGF-CP1 Operating Instructions Manual

System settings

Item
Device name
Auto power on/off
New info indicator
System information
Internal memory info
Important messages
About VGF-CP1
Initialization
Item
Initialize system
Initialize settings
Initialize internal memory
Initialize cache
6
Options/Description (underlined option is the default setting)
Registers a device name for this unit.
This unit goes to standby mode automatically when the surrounding area
becomes dark. The power comes back on automatically when the surrounding
area becomes bright. The default setting is [Off ].
Sets up the lighting pattern of the New Info indicator (always off in standby mode).
[Always on (with new arriv.)], [Auto on/off (with new arriv.)], [Always on], [Always off ].
Displays [MAC address], [IP address] and [Software version].
Displays the current usage of the internal memory.
Displays update information and some other important information. When
updating is completed, the power of this unit turns off automatically. After
confirming the power is turned off, disconnect the AC adapter, and leave for
more than 30 seconds, then connect the AC adapter again.
Displays copyright and trademark information.
Options/Description (underlined option is the default setting)
Restores the system to the factory default.
Returns the settings to their factory defaults.
All registered frames are deleted, and sample frames are restored to their
defaults.
Resets internal memory to the factory default.
All registered photos and music files are deleted, and sample photos and music
files are restored to their defaults.
Resets the cache memory to the factory default by performing [Reload] for all
photos.
Data stored in the cache memory is deleted; however, photo files remain undeleted.