Siemens MOBILETT Plus Service Instructions Manual page 68

8 - 4
3
Fig. 4
•
Remove the cable winder assembly.
•
Remove the two cable ties (pos. 1 / Fig. 4).
•
Remove four screws and four nuts (pos. 2 / Fig. 4) and Y-plate (pos. 3 / Fig. 4).
•
Disconnect cable from upper plate (pos. 1 / Fig. 5).
•
Remove the distance ring (pos. 2 / Fig. 5) from the axle.
•
Loose the brake carefully to loose the tension of the cable winder spring.
•
Remove securing screw (pos. 1 / Fig. 7).
•
Pull out the cable winder.
MOBILETT Plus/ - E/ - M
1
2
3
2
4
Fig. 5
SPR8-215.898.01
Rev. 05 01.02
Miscellaneous
Page 4 of 6 Siemens-Elema AB
SPS-UD
1
3
Solna, Sweden