Shock Assembly (Walker Evans) - Polaris General 2020 Service Manual

STEERING / SUSPENSION
13. Take apart the two halves of the body. It should
separate into three separate pieces.
NOTICE
Use a heat gun to aid in disassembly.
14. Remove the base valve.
15. Remove the IFP from reservoir eyelet cap.
16. Replace all o-rings.
9.88

SHOCK ASSEMBLY (WALKER EVANS)

1. With the needle in the charge port, push IFP until it
bottoms out. Then, remove the needle.
2. Replace o-ring in the coupler thread on body side.
Thread onto the main body with threadlocker.
3. Install the base valve into the can. Then, install the
second o-ring into the coupler.
9850067 R01 - 2020-2021 GENERAL / GENERAL XP Service Manual
© Copyright Polaris Inc.