Advertisement
en
Universal cutter L
Congratulations on the purchase of
your new Bosch appliance. You can find
further information about our products
on our web page.
Country of origin:
Slovenia
Exclusive distributor:
BSH Home Appliances (China) Co., Ltd.
20/F,21/F, CN International Mansion,
129 Zhongshan Road, Nanjing,
Jiangsu Province, PRC.
Careline:
4008855888
Service E-mail:
careline.china@bshg.com
Company website:
www.bosch-home.cn
Before use, read these instructions
carefully in order to become familiar
with important safety and operating
instructions for this appliance. Please
keep the operating instructions in a safe
place. If passing on the appliance to a
third party, always include the operating
instructions.
Universal cutter L
Please fold out the illustrated pages.
X Figure A
1 Universal cutter L/XL
2 Blade
3 Attachment
4 Lid
5 Ice-crusher-blade (for size L only)
With the universal cutter XL, you can use
the appliance at full power. A universal
cutter can be ordered from customer
services (order no. 753122).
Operating the appliance
The universal cutter is suitable for cutting
meat, hard cheese, onions, herbs, garlic,
fruit, vegetables, nuts, and almonds.
Always observe the maximum quantities
and processing times in the table (Fig. C).
8
08_MSMM8910CN_Accessory_8001020894.indb 8
You can crush ice with the ice crusher
blade. Optimum processing quantity: 4–6
ice cubes.
W Risk of injury from sharp blade!
Never grip the blade in the universal cutter.
Take hold of the universal cutter blade by
the plastic handle only. Do not touch blade
with bare hands. Clean with a brush.
Warning!
The universal cutter must be completely
assembled before use!
Caution!
Before cutting meat, remove gristle, bones
and sinews.
The universal cutter is not suitable for
cutting very hard items (coffee beans,
radishes, nutmeg) or frozen food (fruit, etc.).
X Fig. B
■ Place universal cutter on a smooth,
clean work surface and press into
position.
■ Insert blade.
■ Add food.
Warning!
Blade must sit straight in the universal
cutter so that the attachment sits correctly
(Fig. B-3).
■ Place attachment on the universal cutter
and rotate in a clockwise direction until it
clicks into position.
■ Place the base unit on the attachment
and lock into position.
■ Connect the mains plug.
■ Hold the base unit and universal cutter
firmly and switch on the appliance (turbo
speed).
■ Release the On button after processing.
After using the appliance
■ Pull out the mains plug.
■ Press the release buttons and remove
the base unit from the attachment.
■ Rotate the attachment in an anti-
clockwise direction and take off
the universal cutter.
■ Take hold of the blade by the plastic
handle and take out.
■ Place the lid on the universal cutter to
keep in the processed ingredients.
25.08.2015 11:48:45
Advertisement
