Table of Contents
Advertisement
12
2.
Press the orange Shock button as directed. The AED Trainer 3 announces
the current training scenario number.
3.
To select a different scenario, press and hold the orange Shock button to
scroll through each of the eight scenarios in sequence. The AED Trainer 3
announces each scenario number as it is reached. See page 17 for a
detailed description of each scenario.
4.
When you reach the desired scenario, press the On/Off button to turn
off the AED Trainer 3 and store the scenario selection on the Operating
System Card. The selected scenario will be active the next time the AED
Trainer 3 is turned on.
NOTE: The AED Trainer 3 automatically turns off if it is inactive for ten
minutes.
RUNNING A TRAINING SCENARIO
To run a training scenario, press the On/Off button to turn on the AED
Trainer 3, and following the AED Trainer 3's voice instructions to simulate use
of the FR3 AED in an emergency. For troubleshooting assistance, see page 21.
USING THE OPTIONAL REMOTE
CONTROL
If desired, the AED Trainer 3 can be used with an
optional remote control that allows the instructor to
select and override training scenarios.
The remote control uses infrared light and requires a
direct or indirect light path from the remote control to
the receiver window on the AED Trainer 3.
cover the receiver window when using the remote
control
. The location of the receiver window is identified
on the diagram on the inside front cover of this manual.
NOTE: If a direct line is blocked, pointing the remote control at the ceiling
may provide a good indirect light path.
AED Trainer 3
1
5
Do not
2
3
4
6
7
8
Advertisement
Table of Contents
