Remote Control - Philips AED Trainer 3 Instructions For Use Manual

REMOTE CONTROL

A description of the button functions of the remote control is provided
below.
BUTTON
Scenario selection. Press to select one of the eight
1 8
standard scenarios. (The AED Trainer 3 will start the
selected scenario.)
Pause/Resume. Press Pause to freeze all activity in the
AED Trainer 3. (The AED Trainer 3's On/Off light will
flash at a slow rate when the AED Trainer 3 is paused.)
Press Resume to continue the activity from the point at
which it was paused.
Shockable Rhythm. Press to initiate simulated
shockable rhythm. (This function overrides the running
scenario.)
Non-Shockable Rhythm. Press to initiate simulated
non-shockable rhythm. (This function overrides the
running scenario.)
CPR First. Press to simulate a shockable rhythm that
will generate a CPR First decision by the AED Trainer 3
for the first rhythm analysis, and a shock decision for
subsequent rhythm analyses. (This function overrides the
running scenario.)
Good Pads Connection. Press to simulate good pads
connection to the AED Trainer 3. (This function
overrides the detection of physical pad placement.)
Poor Pads Connection. Press to simulate poor pads
connection to the AED Trainer 3. (This function
overrides the detection of physical pads connection.)
Motion Artifact. Press to simulate motion artifact
interference with rhythm analysis. (This function
interrupts analysis and the AED Trainer 3 gives a voice
prompt instructing the trainee to stop all motion.)
FUNCTION
19