Product Description - ABB 180 Comfort Operating Instructions Manual

Product Description

GB
The multi-lens of the UP watchdog offers additional co-
verage zone setting possibilities. Otherwise, all units
have identical functions.
The UP watchdogs are passive infrared motion
detectors. If a heat source is detected somewhere in
the zone of coverage of the unit, the UP sensors switch
on the connected lighting system. When the heat
source leaves the coverage zone or remains stationary
or immovable the lighting is switched off after a preset
delay period (rundown time) has elapsed.
An integrated dusk sensor enables the switching
brightness (ambient luminosity) to be set at which the
unit's monitoring function is activated.
The UP watchdogs are glare-proof, ie. if exposed to
direct light (eg. from an electric torch/flashlight) the
unit's monitoring function remains activated for approx.
1½ minutes.
The switching behavior can be parameterized using
ETS2 or Power-Project (Version 3.0 or higher (see Technical Manual
and individual windows of the parameterization software
package). Switching brightness and cut-out delay may
also be set directly on the unit.