Toshiba RUAGP Series Original Owner's Manual page 25

Home screen
[About the display]
• 1, 2, 3, 6, 7 in the figure below are buttons. Select with the cursor and press
the destination.
1
4
5
6
Refer to the table below for the display of 1 to 7.
Classification
1 Operating status
2 Operation mode
MC pattern 1
MC pattern 2
MC pattern 3
MC pattern 4
GC pattern 1
GC pattern 2
3 Pattern
GC pattern 3
GC pattern 4
GC pattern 5
GC pattern 6
GC pattern 7
GC pattern 8
System name
4 System status
Cooling symbol Cooling mode selected
Heating symbol Heating mode selected
Stopped symbol Stopped is selected in the operation pattern settings
System status
5
data
6 Failure display
*1 Details of the cooling, heating, and stopping icons are as described below.
Display Name
Cooling symbol
Heating symbol
Stopped symbol
2
Display
Run Operating
Stop Operation stopped
Unit Unit selected (control by button operation)
Remote Remote selected (controlled by GC)
External External selected (controlled by Modbus)
MC pattern 1 selected
MC pattern 2 selected
MC pattern 3 selected
MC pattern 4 selected
GC pattern 1 selected
GC pattern 2 selected
GC pattern 3 selected
GC pattern 4 selected
GC pattern 5 selected
GC pattern 6 selected
GC pattern 7 selected
GC pattern 8 selected
Displays "MC-A" or "MC-B"
Run Operating
Stop Operation stopped
Disable Disabled operation selected
Ope Capa Operating capacity of compressor
Setting Set outlet water temperature
EWT Inlet water temperature
LWT Outlet water temperature
UC No. Number of connected UCs
Set value when demand control is enabled, OFF
Demand
when disabled
Fail hist Displays failure code during failure reporting
Description
In cooling operation
In heating operation
Operation stopped
3
7
Description
- 23 -
. See the table below for
Destination
MC operation switching screen
Remote switching screen
MC pattern
* Display only during GC
operation
Display only
* Switching system data
Display only
Failure log