Safety Precautions - Toshiba RUAGP Series Original Owner's Manual

The manufacturer shall not assume any liability for the damage caused by not observing the
description of this manual.
WARNING
General
• Carefully read Instruction Manual before starting the unit. There are many important things to
keep in mind for daily operation. Otherwise, falling down of the unit may occur, or the unit may
cause noise, vibration or water leakage.
• Ask for installation to be performed by the dealer or a professional. Only a qualified installer
(*1) is able to install a unit. If a non-qualified person installs a unit, it may result in problems
such as fire, electric shock, injury, water leakage, noise and/or vibration.
• Take measures to prohibit persons other than those concerned from entering the area where
the unit is installed.
• Be sure to use the company-specified products for the separately purchased parts. Use of
non-specified products may result in fire, electric shock, water leakage, etc. Have the
installation performed by a professional.
• Do not use any refrigerant different from the one specified for complement or replacement.
Otherwise, abnormally high pressure may be generated in the refrigeration cycle, which may
result in a failure or explosion of the product or an injury to your body. The refrigerant used by
this unit is the R32.
• Before opening the service panel of the unit, set the circuit breaker to the OFF position, lock
the circuit breaker in the OFF position, place a "work in progress" sign near the circuit breaker,
and wait for 10 minutes to discharge the capacitors completely. Failure to set the circuit
breaker to the OFF position and wait for 10 minutes to discharge the capacitors may result in
electric shocks through contact with the interior parts. Only a qualified installer (*1) or qualified
service person (*1) is allowed to remove the service panel of the unit and do the work
required.
• Use of a stand more than 50 cm high to clean the body of the unit or to carry out other such
jobs constitutes working at heights. Due to the danger of falling off the stand and injuring
yourself while working at heights, this kind of work should not be done by unqualified
individuals. When this kind of work must be carried out, do not do it yourself but ask a qualified
installer or a qualified service person to do it for you.
• Do not touch the aluminum fin of the unit. You may injure yourself if you do so. If the fin must
be touched, do not touch it yourself but contact a qualified installer or a qualified service
person.
• Do not climb onto or place objects on top of the unit. You may fall or the objects may fall off of
the unit and result in injury.
• Do not disassemble, modify, repair or move the product yourself. Doing so may cause fire,
electric shock, injury or water leaks. Ask a qualified installer or qualified service person to do
any repairs or to move the product.
• Using FlashAir make any other machines having problem, deattached FlashAir at once
• Carefully read Instruction Manual before starting the unit. There are many important things to
keep in mind for daily operation.
Transportation and storage
• When transporting the unit, wear shoes with protective toe caps, injury protection gloves with
non-slip function and long sleeved working clothes.
• When transporting the unit, do not take hold of the packing materials. You may injure yourself
if the packing materials should break.

Safety Precautions

- 4 -