Appendix A Differences From Icdmini Ver. 2.0 - Epson ICDmini 3.0 User Manual

Appendix A Differences from ICDmini Ver. 2.0

The table below lists the differences between the ICDmini Ver. 2.0 and Ver. 3.0.
Table A.1 Differences between the ICDmini Ver. 2.0 and Ver. 3.0
Item
Core CPU supported
Flash memory programming
voltage (V ) output
PP
V voltage
PP
Target system I/O interface voltage
Target system interface voltage
output
Flash memory programming power
supply cable
Flash memory programmer mode
(multi-programmer support)
Reset switch
LED
BRKIN and GND pins
USB connector
Supplied cable
MCU supported
Firmware update
*1 Includes a flash memory programming power supply pin
ICDmini Ver. 3.0 User Manual
(Rev. 1.0)
Appendix A Differences from ICDmini Ver. 2.0
ICDmini Ver.2.0 (S5U1C17001H2100)
S1C17/S1C33
Available
6.0 V to 8.0 V variable voltage
(when S1C17 is selected)
1.8 V or 3.3 V internal voltage, or 1.0 V
to 5.5 V supplied from the target system
1.8 V or 3.3 V (max.100 mA)
Available
Available
Available
Four 7-color LEDs
Available
Standard-B
One 4-pin target system connection
cable, two 4-pin flash memory
programming power supply cables, and
one USB (Standard-A to B) cable
S1C17 and S1C33 Family MCUs
Update using debugger commands
Seiko Epson Corporation
ICDminiVer.3.0 (S5U1C17001H3100)
S1C17
Available
7.0 V or 7.5 V selectable fixed voltage
3.3 V internal voltage or 1.2 V to 5.5 V
supplied from the target system
3.3 V only (max.100 mA)
Integrated in the target system
interface connector and cable
Unavailable
Unavailable
Two single color LEDs (green and red)
Unavailable
Mini-B
One 10-pin target system connection
cable *1 and one USB (Standard-A to
Mini-B) cable
S1C17 Family MCUs except
S1C17803 (when used with a 24 MHz
or higher OSC3 clock)
Update using a file explorer on the
host computer
15