Table of Contents
Advertisement
DOK-SUPPL*-VPB*40.1***-PR02-EN-P
Rexroth IndraControl VPB 40.1 Control Cabinet PC
Profibus and further settings
●
Red LED: Fan stands still, or fan speed is too low or too high.
●
Green LED: Fan is working properly.
Clicking on the StopAutoRefresh button, disables the automatic update of the
measured values and the labeling on the button changes to AutoRefresh.
Clicking on the AutoRefresh button, enables the automatic update of the meas‐
ured values and the labeling on the button changes to StopAutoRefresh.
The ProfiBus/Mode COM3 tab consists of the following both segments:
●
Profibus Adr.: Select the PROFIBUS address
●
Select COM3 Connection: Selection, if the COM3 interface is provided as
serial interface at the XCOM3 connector or is internally connected with the
keyboard controller.
Fig.9-7:
Profi Bus / Mode COM3 tab
Select COM3 connection
XCOM3
COM3 is accessible at connection XCOM3
Keyboard Controller
COM3 is internally connected with the keyboard controller to
●
●
Fig.9-8:
Select COM3 connection
Bosch Rexroth AG
request the state of the M-keys via the serial interface
(see section "M-keys" in
chapter 6 "Display and Oper‐
ating Components" on page 29
reload firmware into the keyboard controller
67/81
Software
) or
Advertisement
Table of Contents
