Siemens S7-1500 Manual page 60

Technical specifications
6.7 Technical specifications for terminal modules
Table 6- 11
Terminal modules TPS (witch), 3-wire initiators with LED, incl. switch in the signal path
6ES7924-0CH20-0Bx0
Type of supply voltage
Operating voltage
Max. permissible continuous current per signal
Max. permissible total current (power supply)
Switch
Type
Activation during operation
General data
Connection to SIMATIC fitted for
Operating temperature
Mounting position
Clearances and creepage distances
Dimensions (W x H x D) in mm
For 3-wire initiators with disconnector 6ES7924-
0CH20-0Bx0
Table 6- 12
Terminal modules TP2, 2 A modules without LED
6ES7924-0BB20-0Ax0
Type of supply voltage
Operating voltage
Max. permissible continuous current per signal
Connection to SIMATIC fitted for
Operating temperature
Mounting position
Clearances and creepage distances
Dimensions (W x H x D) in mm
For 2 A modules 6ES7924-0BB20-0Ax0
60
Technical specifications for terminal module TPS with LED
Technical specifications for terminal module TP2 without LED
DC
max. 24 V
1 A
4 A / byte
DIP slide switch
Activation during operation permitted,
Max. switching capacity 10VA,
ON = "top" position, set to "ON"
16-pin IDC connector with fitted strain relief
0 to + 60° C
Any
IEC 60664-1, IEC61131-2,
CSA C22.2 No 142 UL 508, VDE 0160,
Overvoltage category II,
pollution degree 2
Approx. 57 x 76 x 60
DC
max. 50 V
2 A
16-pin IDC connector with fitted strain relief
0 to + 60° C
Any
IEC 60664-1, IEC61131-2,
CSA C22.2 No 142 UL 508, VDE 0160,
Overvoltage category II,
pollution degree 2
Approx. 57 x 76 x 60
SIMATIC TOP connect for S7-1500 and ET200MP
Manual,