Epson Stylus Photo 1280 Printer Basics Manual page 18

5. Insert the tabs on the roll paper holders into the slots on the paper support
adapter. As you face the front of the printer, insert the tab on the right roll paper
holder into the slot at the right end of the adapter, and the tab on the left roll
paper holder into the appropriate slot to the left.
Note: It's important to insert the tab on the right roll paper holder into the slot at
the right end of the adapter. Otherwise your roll paper won't load correctly, and
you may see an error.
6. Feed the end of the paper into the printer as far as it will go, then slide the left
edge guide against the paper.
7. Gently rotate the roll backward to remove any slack from the paper.
8. Make sure the output tray is open but the extensions are closed, and leave ample
room at the front of the printer for your paper to eject smoothly.
12
Slot at right end
of the adapter