Performing Additional Maintenance Tasks; Changing The Date And Time; Using The Maintenance Mode - Epson Stylus Pro 4000 Printer Manual

Maintaining and Transporting the Printer

Performing Additional Maintenance Tasks

In addition to running a power cleaning cycle and replacing the cutter blade,
you can use the Maintenance menu to set the printer's date and time. You
can also use the maintenance mode to change printer defaults and run
special procedures.

Changing the Date and Time

Follow these steps to set the date and time:
1. Press the
Menu
2. Press the button until you see
again.
3. Press the button until you see
.
4. Use the or buttons to set each item in the date and time, displayed
in the following format: MM/DD/YY HH:MM.

Using the Maintenance Mode

The maintenance mode allows you to make special settings and perform
maintenance procedures that may be needed occasionally. You can use the
maintenance mode to do the following:
Print a hex dump for diagnosing problems
•
Change the language or units of measurements used on the printer's
•
control panel menus
Change the default pressure setting for the automatic cutter
•
Run a "super strong" cleaning cycle.
•
Return all of the printer's control panel settings to their default values
•
4-105
button.
MAINTENANCE
CLOCK SETTINGS
| 105
, then press
Menu
, then press
Menu