Aligning The Print Head - Epson Stylus Pro 4000 Printer Manual

Tip: To properly align the
print head, you can use
EPSON Enhanced Matte
paper or Premium Luster
Photo Paper.
Maintaining and Transporting the Printer

Aligning the Print Head

Aligning the print head is the most important thing you can do to ensure the
best print quality. If banding appears on your prints, if they look grainy or
blurry, or you see misregistration or "ghosting," you need to align the print
head.
Although you can align the print head using the printer utility software, it's
best to align from the control panel. This will do the most thorough job in
the shortest time, and it's all automatic.
If you haven't already done so, it's a good idea to run a nozzle check before
aligning the print head (page 96). This ensures that the print head alignment
patterns print correctly.
Follow these steps to align the print head using the control panel:
1. Make sure the printer is turned on. Then load EPSON Enhanced Matte
paper or the paper that came with the printer.
2. Press the
Menu
3. Press the button so you see
. You see
Menu
4. Press the
Menu
This is the correct thickness setting for most EPSON papers, including
Enhanced Matte paper.
5. Press the
Menu
to display
PAPER THKNS
6. Press the button to display
7. Press the
Menu
button again. You see
alignment to start with.
8. Press the
Menu
4-99
button.
HEAD ALIGNMENT
.
PAPER THKNS
button again so that
*STD
button to register the value, then press the
again.
ALIGNMENT
button to display
AUTO
(uni-directional). This is the type of
UNI-D
button again to start the alignment process.
, then press
appears on the display.
button
.
, then press the
Menu
| 99