Advertisement
5
Select your Wi‐Fi
network
6
7
Device will blink in the following sequence:
*Note:
If the Wi‐Fi device is not connecting to your Wi‐Fi network. Please re‐check the following
and start from step one.
• Check Wi-Fi Signal Strength
• Check if internet service is active (Connect to Wi-Fi network with smart phone to verify the internet connection is working)
• Make sure you are selecting the right network.
• Make sure you are entering your network password properly (Case sensitive)
After Verifying these points:
1)
Press and hold for
10seconds and
release the back
button on the
device.
Set up
Setting up
2)
3) Go back to Step number One and
start again
LED turns solid green
Insert
Password
Click Next
Advertisement
