8
Go to web site
https://user.intesishome.com/login
Note*
Confirm the IntesisHome Email before moving to step 8b.
8b
Click
https://user.intesishome.com/login
8c
IntesisHome
Download
application from:
9
Once you have the IntesisHome device installed and Wi‐Fi configured, you are ready to start
the IR Configuration process. Learning mode is use to provide the end user a quick way to set
up their IR wireless connection in seconds.
NOTE: Make sure that the AC unit is Off and the Fujitsu wireless Controller is Off before pressing the On/Off button. In order to ensure the
learning process, please make sure you send an On command from your Fujitsu Wireless controller. Make sure your wireless remote
controller has fully charge batteries.
1) Fujitsu wireless remote controller is off, only time should be display in the remote
controller.
2) Press and hold the black button on the back of the Wi‐Fi module for 4 seconds and release.
Top LED will turn on steady white.
3) Press Start Stop on your Fujitsu wireless remote controller while pointing to the Wi‐Fi
module. Refer to picture A:
A
3ft Max
Registering
8a
New user: The picture above
will automatically ask to add a
device.
IR Configuration
Fill form to create account.
Registration number is located in the
back of the physical Wi‐Fi device, Box or
manual.
Once the device is register. You are
now ready to control your system.
IOS
Android
Sign in with your new
account and enjoy
controlling your Fujitsu
system!
• If the IntesisHome device LED starts blinking
Green, the IR learning process has been
successful.
• If the IntesisHome device LED starts blinking in
Red, repeat the process from step 1 and check our
compatibility list. If problem still persists, please
visit our support section at
www.fujitsugeneral.com/wifi.htm
• If the IntesisHome device LED turns Off, repeat
the process from step 1 and check that your IR
wireless remote controller has batteries and that
you are pointing directly to the IntesisHome IR
receiver.